110V Industrial Blind Stitch Sewing Machine Single Thread for Garment Tailor (SMART SEWING TOOL)

Our 110V Industrial Blind Stitch Sewing Machine Single Thread for Garment Tailor (SMART SEWING TOOL) is available with MOQ 1 Unit at USD 960 / Unit, combining high quality, stable production, and dependable logistics for global distribution.

New: A brand-new, unused, unopened, undamaged item in its original packaging .

The industrial blind stitch sewing machine is a professional stitching device specifically designed for sewing blind stitches for cuffs, trouser legs, necklines, hems and other parts of knitted fabrics, cotton fabrics, woolen fabrics, chemical and blended fabrics, etc. It adopts the special design and stitch structure, achieving high-precision and high-strength blind stitch sewing and meeting the technological requirements of high-end products. The industrial blind stitch sewing machine can be widely applied to garment factories, tailor shops, dry cleaning shop and other places, can effectively improve the product quality and production efficiency, remarkably reduce the labor cost and increase the added value of products.

Sewing mode

Single-thread sewing, chain stitching, blind stitching

Maximum sewing speed

2500 stitches per minute

Stitch gap

3-8mm

Skip stitching device

Equipped with a single-stitch skipping device (1:1, 2:1)

Machine needle

LW x 6T

Motor

AC servo motor

Voltage

110V

Size of supporting table

120x54x75cm (47.2x21.2x29.5 inches)

Net weight

48kg (105.8LBs)

Attention

1. Before use, carefully remove the protective oil, dust and dirt on the machine. During cleaning, pay special attention to vulnerable parts such as the looper and feed mechanism to avoid damaging the components.

2. For the new machine, it is recommended that the maximum rotation speed should be 1800-2000rpm during initial use. After 2-4 weeks of trial operation, the operator has mastered the machine proficiently, and the rotation speed can be increased to 2500rpm accordingly.

3. Do not start the machine when there is no sewing material between the feed dog and the presser feet, unless the knee leaning rod is pressed down. Otherwise, it will cause accelerated wear between the feed dog and the left/right presser feet.

4. Do not touch the running parts during operation. Do not put the hands into the machine.