Bitumen Primer
1-1000 Unit
NegotiableMOQ:
Not specified
Payment Term:
To be discussed
Trade Term:
To be discussed
Port Of Loading:
Not specified
Key Takeaways
Freshdi AI is analyzing this product...
Product Specifications
Operating Temperature Range:
-30 C To 200 C
Density:
1.0 Kg/l
Minimum Coating Thickness:
1.0 Mm
Recommended Coating Thickness:
1.5 - 2.0 Mm
Cured Time:
2 - 4 Days
Shelf Life:
24 Months At 30c (+2oc)
Curing Speed:
3 - 4 Hours
Bitumen Content:
41% By Weight
Water Penetration Resistance:
48 H, 1 Bar: 78.5 Cm2: 0 Ml
Tack Free Time:
5 - 10 Hours
Water Vapor Permeability:
6 X 10-7 Mg / Hmpa
Hydrostatic Pressure Resistance:
96 H, 4 Bar: 78.5 Cm2: 33 Ml
Chemical Base:
Bituminous Rubber Emulsion
Color:
Black
Viscosity Adjustment Method:
By Adding Up To Max. 5% Of Clean Water
Application Method:
By Brush Or Roller
Water Content:
By Humidity And Thickness Of The Coating
Solid Content:
By Temperature, Substrate Temperature
Application Surface Requirement:
Clean, Dry, And Rough Concrete Surface
Safety Note:
Contains Volatile And Slightly Toxic Solvent; Keep Away From Spark And Open Flames
Pre Application Repair Requirement:
Cracks, Broken Mortar Joints Must Be Repaired Prior To Application
Drying Time:
Depends On Temperature
Physical State:
Liquid
Adhesion To Metal:
Moderate
Surface Preparation Note:
No Primer Should Be Applied Over Smooth And Wet Surfaces
Adhesion To Glass:
Poor
Resistance To Acid And Alkali:
Resistant
Viscosity Property:
Thixotropic
Adhesion To Timber:
Very Good
Adhesion To Concrete:
Very Good
2.8
India
Ganeshas Lime And Minerals
Verification information
Verify business documents
By Freshdi Verification System
Verify work email
By Freshdi.com
Verify account email
By Freshdi.com
Verify phone number
Product descriptions from the supplier
Bitumen Primer
Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application
Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface.
After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly.
The drying time will depend upon the temperature.
24 Month at the temperature 30C (+2OC)
Packing
- Bitumen Primer: 25 Liter Drum
Note
Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area.
Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building.
Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application.
Product Details:
Grade Standard Technical Grade
Physical State - Liquid
Usage - Industrial
Color - Black
Characteristics: Appearance/Color - Pasty liquid/ black
Chemical Base - Bituminous rubber emulsion.
Density - 1.0 kg/l
Curing Speed/ Rate - 3 - 4 hours
Tack free after - 5 - 10 hours
Cured after - 2 - 4 days (Dependent on ambient
Solid Content by - temperature, substrate temperature,
Weight - relative
Water Content by weight - humidity and thickness of the coating)
Bitumen Content - 41%
by weight - Thixotropic (The viscosity can be
adjusted by - Viscosity
adding up to max. 5% of clean water. - Stir well
prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability
Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
User Reviews
No reviews yet
Be the first to share your experience - your feedback helps other buyers trade with confidence.
You are viewing details for Bitumen Primer. The information provided here is either posted directly by the supplier, who is responsible for its accuracy, or collected by Freshdi AI from publicly available sources. Freshdi strives to make product information as useful and reliable as possible, but we do not guarantee complete accuracy. If you notice any incorrect or misleading details, please use the Report Product option so our team can review and address it quickly.
Negotiable
Min. order: 1 Unit
Ganeshas Aim Industries Private Limited
Active
